Oak Table Top

Have a questions on finishing, refinishing, or restoring <br />wood furniture or cabinetry? This is the place to ask!

Moderators: AsonnyA, Bob Boardman

tnyce
Regular
Regular
Posts: 22
Joined: Wed May 27, 2015 7:45 am

Oak Table Top

Postby tnyce » Mon Jan 08, 2018 10:15 am

I just received a oak table top in for a small damage to the top for repair. I tested the finish with acetone on my finger and it dosen't move. I can do the repair not the problem, but after I scuff up the finish will nitro- cellouse lacquer bond to the top? The table is from the 80's. Any suggestions?
Tim

User avatar
Bob Boardman
Refinish/Repair Wiz
Refinish/Repair Wiz
Posts: 1818
Joined: Sun Aug 01, 2004 5:03 pm
Location: NJ

Re: Oak Table Top

Postby Bob Boardman » Tue Jan 09, 2018 2:36 pm

If acetone doesn't remove or soften the finish, then it's not a lacquer finish. If it's not a lacquer finish, then the finish is a harder, more durable finish than lacquer. That being the case:
1) It's not a good idea to put a softer finish over a hard finish,
2) Why are you using lacquer
3) If you do use lacquer, I'd test in some inconspicuous spot first to ensure compatibility
Bob "Boardman" Borders

tnyce
Regular
Regular
Posts: 22
Joined: Wed May 27, 2015 7:45 am

Re: Oak Table Top

Postby tnyce » Wed Jan 10, 2018 10:59 am

is there a way to tell what type of finish is on it?

User avatar
Bob Boardman
Refinish/Repair Wiz
Refinish/Repair Wiz
Posts: 1818
Joined: Sun Aug 01, 2004 5:03 pm
Location: NJ

Re: Oak Table Top

Postby Bob Boardman » Wed Jan 10, 2018 1:10 pm

Use a cotton swab and rub on an inconspicuous spot:
- use lacquer thinner or acetone. If lacquer, finish will come off or soften
- use denatured alcohol. If shellac, finish will come off or soften (it's unlikely that its shellac)
- if neither make finish come off or soften, then it's a poly or varnish type finish
Bob "Boardman" Borders

tnyce
Regular
Regular
Posts: 22
Joined: Wed May 27, 2015 7:45 am

Re: Oak Table Top

Postby tnyce » Thu Jan 11, 2018 10:59 am

Thank You


Return to “Q&A Forum”

Who is online

Users browsing this forum: Google [Bot], MSN [Bot] and 10 guests

cron