Metallic paint compatibility

Have a questions on finishing, refinishing, or restoring <br />wood furniture or cabinetry? This is the place to ask!

Moderators: AsonnyA, Bob Boardman

alexh
Newcomer
Newcomer
Posts: 2
Joined: Mon Jan 19, 2009 9:57 pm

Metallic paint compatibility

Postby alexh » Sat Aug 24, 2013 12:17 pm

Hi,

I'm restoring some painted furniture using ML Campbell solvent based pre cat tinted products. The original finish on these items typically has a some gold striping on the beads and grooves. At the widest they are about 1/8". I would apply this with an artists brush after the topcoat and probably spray clear afterwards.

I have used Blue Pearl metallic for other projects but these are acrylic water based so I'm concerned about compatibility. The only other oil based source I can think of is artists oil colors. Also, there are metallic paints for model makers but they are usually water based.

Any suggestions? Is the water based over oil really a problem at this small width?

In my experience the most important factor in water based over oil is that the base not be gloss or semi-gloss - the rougher the better and of course I can sand the base lightly if I top coat clear.

Thanks

Return to “Q&A Forum”

Who is online

Users browsing this forum: No registered users and 16 guests